This T-shirt is a phoenix. It has risen from the ash pile that was an impulse-bought, rarely worn maxi dress lying in a heap in my closet for nearly a year. I really tried to give the maxi/midi dress trend a go last summer, but I ended up feeling kind of silly wearing that much material. Plus, I run warm, temperature-wise, and HOT DAMN maxi dresses do not let your bottom half breathe. Thus, the stripy knit tee was born.
Maxi dresses are probably the easiest thing to upcycle since you have so much material to work with. I was able to cut the front on the fold, but I had cut the back in two pieces. That’s where this ~*~funky~*~ bias-cut back panel came in, and it’s by far my favorite part of this otherwise basic shirt. That’s one of the great things about sewing: a problem often transforms into an opportunity for a unique design element.
As far as fit goes, I used the same sizing as my first Plantain tee, cutting out a straight 40 and adding 1″ to the body. Lacking fabric, I cut the short sleeves this time. The viscose/poly material is wonderfully drapey and comfortable, but its fluidity made sewing the neckband a little tricky. I ended up not catching the band in one spot in the front and had to rip some stitches out and re-sew (SO annoying when you’re using the lightning bolt stretch stitch). I managed to patch it up well enough, and it’s safe to say that this tee will get plenty of wear this spring and summer.
I’m thinking I’ll take part in Me Made May this year, and tops like this will be great to have in the everyday arsenal. Have you taken part in MMM before? What am I in for?
My boyfriend’s wardrobe consists almost entirely of slim-cut button-down shirts, which look great but don’t last forever. A few of the older ones have started fraying and two of them have developed the dreaded elbow hole. Since it’s summer (THANK GOD) and elbow patches don’t sound too appealing right now, I decided to chop off the sleeves and hem them so the shirt’s still wearable.
I found this simple tutorial from The Mother Huddle, and the process is nearly as straightforward as it seems.
First, find an existing short-sleeve shirt to act as your guide.
Using a rotary cutter, cut parallel to the line of the short sleeve, leaving an extra 1.5″ for hemming purposes.
You should be left with something like this. (Sorry for the clashing floral carpet/plaid. My eyes!)
Fold the raw edge of each sleeve up 3/4″. Give this fold a quick press so it stays uniform and doesn’t unfurl.
Fold the sleeve edge up again another 3/4″ and press thoroughly. You might want to try the shirt on at this point to make sure the sleeves are even.
And now for the slightly tricky, but manageable part: stitching around the cuff without having the seam pucker. For whatever reason, there was a little extra fabric leftover the first time I hemmed the sleeve, causing it to pucker where the stitches ended. After ripping those suckers out, I tried again. I avoided the seam pucker the second time by starting the stitch about 1/4″ past the underarm side seam. That way, the small amount of leftover fabric can be folded directly under the side seam, hidden from view.
Keeping that in mind, back to The Mother Huddle’s directions:
On the right side of the sleeve (from the starting position mentioned above), sew a row of stitches at 5/8″ from the bottom of the cuff. Take your time with this, keeping the stitches uniform all the way around. Sew another row at 3/4″ from the bottom. Don’t forget to backstitch! Press the finished double-row stitching. Repeat for the other arm.
The hem should look something like this.
And it’s really that simple. No more throwing away holey shirts or using them as expensive dish rags. Happy upcycling!
I dig whales. As a kid, I was obsessed with the beluga whales at the John G. Shedd Aquarium. There’s even a picture of my older brother and I “riding” Shamu at Sea World at the respective ages of 6 and 4. (I definitely talked myself into believing that ride happened.) My latest whale obsession is this Marushka whale-print sweatshirt—pictured above—from Study Hall, a similarly nautically obsessed boutique in Ukrainian Village. I’ve been living in this sweatshirt every weekend, and it inspired me to sew up some whale decor for the apartment. The best part about this project is that you don’t even need to buy fabric (except for piping). So grab an old pair of boot-cut jeans and let’s get to work!
What you need:
Old pair of jeans (the wider the leg, the better)
Button for the whale’s eye
Polyester fiber stuffing
1). Draft a pattern. This step leaves some room for creativity depending on the shape you want to end up with. Whatever you decide, make sure that you first draw the whale as you want it to look, then add a 5/8″ outline around it. That will act as your seam allowance. You can do this on the actual pattern, or just add 5/8″ once you lie the pattern down to cut it. I traced my pattern on a paper grocery bag since it’s got a little heft.
2). Deconstruct your jeans. This part is actually pretty fun (and therapeutic if you have anger issues). Cut a notch on the bottom hem of the leg near one of the side seams, and then rip upwards until you reach the back pocket. Cut a clean line right under the pocket so you have one flat piece of fabric. Iron out any creases.
3). Trace and cut out two mirror image whale pieces. You might be able to use one pant leg if you have enough fabric and don’t mind cutting slightly against the grain.
4). On the wrong side of one pattern piece, draw a mouth. Make sure to account for the seam allowance when making your placement. Using contrast color thread and a fun decorative stitch pattern, sew on the mouth. Remember to backstitch! I also used a little Fray Check at the ends so the thread won’t unravel later.
5). Mark a spot for the eye and hand sew a button on.
6). Pin the piping around the edges of the pattern piece with the mouth and eyes. I made my own piping for this project using this handy tutorial, but you can buy premade stuff at most fabric stores.
With the rolled edge of the piping facing toward the center and the flat edge flush with the raw edge of the pattern, pin the piping around the exterior (to the right side of the pattern). Pinning around all the curves and corners of the whale’s tail can be a little tricky. Clip around the edges so it’s easier for the piping to lie flat.
When you get back to where you started pinning, overlap the edges.
7). Now it’s time to sew the piping on. This part requires some elbow grease and a lot of patience. Using your longest stitch and a zipper foot, baste the piping to the pattern following the stitch line that creates the piping. Go as slowly as you need to. When you get to the overlapped section, just sew straight through, following the same line you were sewing before.
8). Pin the pattern pieces together, right sides facing. Make sure you’ve switched back to a regular sewing machine foot and standard stitch length. Stitch the two pattern pieces together by following exactly along the basting stitched you just made on the piece with the piping. Make sure to leave enough space on the bottom of the whale to turn the pattern inside out when you’re done.
9). Clip excess fabric from the seam allowance. Grade around the curve of the whale’s tail and clip the corners.
10). Turn the pattern inside out, starting with the tail. Push out the corners with something sharp—a pair of scissors or eraser end of a pencil works. You’ll see that the overlapped section of piping isn’t too noticeable.
11). Starting with small handfuls of filling, stuff the whale. I always start with the tail since that seems to be the trickiest part. Make sure you use enough stuffing so the whale tail stands up on its own.